Tesla Model X Owners & Service Manuals

Tesla Model X: Adjusting Steering Yoke Position

Tesla Model X 2015-2024 Owner's Manual / Driving / Steering Yoke / Adjusting Steering Yoke Position

To adjust the steering yoke, touch Controls and touch the Steering icon.

Use the left scroll button on the steering yoke to move the steering yoke to the desired position:

  • To adjust the height/tilt angle of the steering yoke, roll the left scroll button up or down.
  • To move the steering yoke closer to you, or further away from you, press the left scroll button to the left or right.

Steering Yoke

WARNING: Do not make steering yoke adjustments while driving.

Adjusting Steering Effort

You can adjust the feel and sensitivity of the steering system to suit your personal preference:

1. On the touchscreen, touch Controls > Pedals & Steering > Steering Mode.

2. Choose a steering option:

  • Comfort - Reduces the effort required to turn the steering yoke. In town, Model X feels easier to drive and park.
  • Standard - Tesla believes that this setting offers the best handling and response in most conditions.
  • Sport - Increases the effort required to turn the steering yoke. When driving at higher speeds, Model X feels more responsive.

    READ NEXT:

     Overview of Steering Yoke Buttons

    Your Model X features stalkless driving in which all controls you need when driving are accessible on the steering yoke. Right turn signal High beam headlights* Left turn signal Left scroll bu

     Left Scroll Button

    Use the scroll button on the left side of the steering yoke to adjust the position of the mirrors and steering yoke. It also controls the wipers and media player. When using media player, push th

     Right Scroll Button

    Use the scroll button on the right side of the steering yoke to control Autopilot features such as Autosteer and Traffic-Aware Cruise Control: When driving, push and release the button to engage

    SEE MORE:

     Handle and Cable Assembly - 80A Wall Connector (Remove and Replace)

    Note: This procedure describes how to remove and replace the 80A Wall Connector handle and cable assembly. For instructions on how to remove and replace the 40A Wall Connector handle and cable assembly, refer to procedure 50024002 (refer to procedure). Removal Warning

     Center Console Assembly (Remove and Install)

    Removal Open both front doors and one of the 2nd row doors. Remove the center console air outlet (refer to procedure). Remove the rear center console trim (refer to procedure). Remove the LH and RH center console closeout extensions (refer to procedure). Remove the stora

    © 2019-2024 Copyright www.teslamx.net