Tesla Model X: Coat Hangers
Your Model X has a coat hanger on each side of the vehicle above the rear window in the second row, next to the reading light. Push the coat hanger to release it. Push it again to retract it.
Active Road Noise Reduction
Model X is equipped with Active Road Noise Reduction which reduces low-frequency road noise while driving on rough surfaces. To accomplish this, the vehicle uses the seat microphones to measure noise in the cabin, then generates anti-noise through the speakers to intelligently create quiet zones around the front occupants depending on vehicle and environmental factors.
To turn Active Road Noise Reduction on or off, open the Media Player and touch Audio Settings icon > Options > Active Road Noise Reduction (the audio settings icon shows an equalizer with three vertical lines). This may require several minutes of driving time to calibrate before enabling.
NOTE: To ensure active noise reduction operates effectively, avoid covering the microphones (with seat covers, etc.). Active Road Noise Reduction may disable if a window is rolled down, door is open, or the fan is turned up. Active Road Noise Reduction also disables if there is a rear passenger in the vehicle.
CAUTION: To prevent damage to these microphones when cleaning, do not over-saturate the area of the seats where the microphones are located.
READ NEXT:
Sun Visors
The sun visors in Model X are held in place by magnets.
To protect occupants from sunlight coming through the
windshield, release the sun visor from the pillar and
pivot it toward the rear view mir
SEE MORE:
About the High Voltage Battery
Model X has one of the most sophisticated battery
systems in the world. The most important way to
preserve the high voltage Battery is to LEAVE YOUR
VEHICLE PLUGGED IN when you are not using it. This is
particularly important if you are not planning to drive
Model X for several weeks.
NOTE: Whe
Trailer Brakes
When towing a loaded trailer that weighs more than
1000 lbs (450 kg), Tesla recommends that the trailer be
equipped with its own brake system adequate for the
weight of the trailer. Ensure compliance with local
regulations. A brake controller must be purchased
separately, and the required 4-pin
