Tesla Model X Owners & Service Manuals

Tesla Model X: About HomeLink

f your vehicle is equipped with the HomeLink Universal Transceiver, you can operate up to three Radio Frequency (RF) devices, including garage doors, gates, lights, and security systems.

NOTE: Depending on date of manufacture, market region, and options selected at time of purchase, some vehicles are not equipped with a HomeLink Universal Transceiver.

WARNING: Do not use the HomeLink Universal Transceiver with a device that does not have safety stop and reverse features. Using a device without these safety features increases the risk of injury or death.

Supported Modes

HomeLink supports three different transmit modes, which is how your vehicle and the RF device communicate. Selecting a transmit mode is determined by your RF device's compatibility:

  • Standard Mode: Use Standard Mode if your RF device is equipped with a remote control that must be used to operate the device (for example, a remote- controlled garage door). This mode is the most commonly used transmit mode for HomeLink devices.
  • D-Mode or UR-Mode: Use D-Mode or UR-Mode if the RF device does not have a remote control, and the receiver has a "Learn" button (may also be called "Program" or "Smart"). D-Mode and UR-Mode function similarly in that Model X communicates directly with the device's receiver as opposed to the remote control.

NOTE: D-Mode is used primarily in North America whereas UR-Mode is popular in Europe, the Middle East, and Asia. To determine the mode your device is compatible with, contact HomeLink (www.homelink.com or call 1-800-355-3515).

Each of your devices can be set to a different mode. For example, your garage door can be set to Standard Mode, your front gate can be set to D-Mode, etc. To change a transmit mode, touch the HomeLink icon at the top of the Controls screen and select the device you want to change. Then, select Program and choose the desired mode for your device. Confirm by touching Set Mode and follow the onscreen instructions.

NOTE: Check the product information for your HomeLink device to determine which mode is compatible with your device.

    READ NEXT:

     Programming HomeLink

    To program HomeLink: 1. Park Model X so that the front bumper is in front of the device you want to program. CAUTION: Your device might open or close during programming. Therefore, before programmin

     Auto Opening and Closing

    To operate a HomeLink device without using the touchscreen, you can automate the device to open as you approach, and close as you drive away: 1. Touch the HomeLink icon at the top of the Controls s

     Troubleshooting HomeLink

    Standard Mode In Standard Mode, Model X records the RF signal from your HomeLink device's remote control. The touchscreen instructs you to stand in front of the vehicle, point the device's remote c

    SEE MORE:

     Magnet - A-Pillar - Sun Visor Bezel - LH (Remove and Replace)

    Removal Remove the sun visor bezel (refer to procedure). Remove the screws (x2) that secure the magnet to the sun visor bezel (torque 2 Nm). Remove the magnet from the sun visor bezel.

     Sensor - Radar - Center - Front (Remove and Replace)

    Removal Remove the front fascia (refer to procedure). Disconnect the harness on the bottom of the radar sensor.   Use a trim tool or flathead screwdriver to gently pry up the tabs on the top of the radar bracket. Gentl

    © 2019-2024 Copyright www.teslamx.net