Tesla Model X Owners & Service Manuals

Tesla Model X: Assembly - Underhood Apron - Front (Remove and Replace)

Tesla Model X 2015-2024 Service Manual / Exterior Fittings / Assembly - Underhood Apron - Front (Remove and Replace)

Remove

  1. Remove the LH and RH underhood aprons (refer to procedure).
  2. Gently pull up on the apron assembly to release it from the clips.

     Assembly - Underhood Apron - Front (Remove and Replace)

  3. Remove the front underhood apron from the vehicle.
Installation

Installation procedure is the reverse of removal.

    READ NEXT:

     Underhood Apron - Center - Rear (Remove and Replace)

    Remove Open the hood. Gently pull forward on the apron to release it from the retention clips.   Remove the rear center underhood apron from th

     Underhood Apron - LH (Remove and Replace)

    Remove Remove the rear center underhood apron (refer to procedure). Gently pull up on the LH apron to release the clips that secure it to the vehicle.Caution: Take care not to damage

     Trim - Liftgate Trough - LH (Remove and Replace)

    Removal Open the liftgate. While noting the number of turns, remove the liftgate stop. Use a trim tool to release the LH liftgate trough trim. Note: Components have be

    SEE MORE:

     Trim - C-Pillar - Mid - LH (Remove and Replace)

    Remove Remove the lower C-Pillar trim panel (refer to procedure). Remove the rear trunk side trim panel (refer to procedure). Release the 2 screws that secure the trim panel (torque 3 Nm).   Release the 4 trim clip

     Charger (Remove)

    Warning: Only technicians who have been trained in High Voltage Awareness are permitted to perform this procedure. Proper personal protective equipment (PPE) and insulating HV gloves with a minimum rating of class 00 (500V) must be worn any time a high voltage cable is handled. Refer

    © 2019-2024 Copyright www.teslamx.net