Tesla Model X Owners & Service Manuals

Tesla Model X: Vehicle Hold

When Model X is stopped, Vehicle Hold can continue to apply the brakes even after you remove your foot from the brake pedal. When driving on a hill or on a flat surface, brake as you normally would. After coming to a complete stop, simply press the brake pedal again (until the instrument panel displays the Vehicle Hold indicator light) to enable Vehicle Hold. You can then release the brake pedal and remain stopped, even on a hill.

This indicator displays on the instrument panel whenever Vehicle Hold is actively braking Model X.

To disengage Vehicle Hold, press the accelerator pedal or press and release the brake pedal.

NOTE: Shifting into Neutral also disengages Vehicle Hold.

NOTE: After actively braking Model X for approximately ten minutes, Model X shifts into Park and Vehicle Hold cancels. Model X also shifts into Park if it detects that the driver has left the vehicle.

    READ NEXT:

     Acceleration Modes

    Touch Controls > Pedals & Steering > Acceleration to choose a preferred acceleration mode: Chill limits acceleration for a slightly smoother and gentler ride. NOTE: When Chill is sel

     Trip Information

    Displaying Trip Information Trip information displays on the touchscreen when you touch Controls > Trips. For the current trip, you can display distance, duration and average energy usage. You c

     Getting Maximum Range

    SEE MORE:

     Applique - Roof - Rear (Remove and Replace)

    Removal Open the liftgate and both rear doors. Apply protective tape on the areas surrounding the rear roof applique to prevent damage. Release the front and rear seals from the rear roof applique. Note: Components have been removed in this graphic to aid cla

     Armrest Pads - Center Console - 1st Row (Remove and Replace)

    Removal Remove the LH armrest pad from the vehicle: Slide the LH armrest pad so that it covers 1/2 of the cupholder. Pull up firmly on

    © 2019-2023 Copyright www.teslamx.net