Tesla Model X Owners & Service Manuals

Tesla Model X: Left Scroll Button

Use the scroll button on the left side of the steering yoke to adjust the position of the mirrors and steering yoke. It also controls the wipers and media player.

Steering Yoke

  • When using media player, push the button to the left to go back to the previous song or station or push it to the right to skip to the next song or station.
  • To increase/decrease the volume of the sound system, roll the button up/down respectively.

NOTE: The scroll button adjusts the volume for media and phone calls based on what is currently in use. As you adjust the volume, the touchscreen displays the volume level and whether you are adjusting volume for media or phone.

  • To mute the media volume, or to pause/play an audio file, push the scroll button.
  • When adjusting mirrors, push the button to the left/right to move the associated mirror inward/outward and up/down to position the mirror upward or downward (see Mirrors).
  • When adjusting the position of the steering yoke, roll the button up/down to adjust the tilt/angle and press the button to the left or right to move the steering yoke closer or further (see Adjusting Steering Yoke Position).
  • When a menu displays on the instrument panel from which you can choose options (for example, wipers), use the scroll button to choose an option (up, down, left, or right).

    READ NEXT:

     Right Scroll Button

    Use the scroll button on the right side of the steering yoke to control Autopilot features such as Autosteer and Traffic-Aware Cruise Control: When driving, push and release the button to engage

     Mirrors

     Adjusting Exterior Mirrors

    Adjust the exterior mirrors by touching Controls > Mirrors. Press the left scroll button on the steering yoke to choose whether you are adjusting the Left or Right mirror. Then use the left scro

    SEE MORE:

     Handle and Cable Assembly - 40A Wall Connector (Remove)

    Note: This procedure describes how to remove and replace the 40A Wall Connector handle and cable assembly. For instructions on how to remove and replace the 80A Wall Connector handle and cable assembly, refer to procedure 50022002 (refer to procedure). Removal Warning:

     Air Spring Module - Rear - RH (Remove and Replace)

    Removal Position the vehicle on a lift, but do not raise the vehicle at this time. Open both rear doors and the liftgate. Connect a laptop with Toolbox to the vehicle. Use Toolbox to depressurize the RH rear air spring. Disconnect 12V power (refer to procedure). Remove

    © 2019-2024 Copyright www.teslamx.net