Tesla Model X Owners & Service Manuals

Tesla Model X: Active Spoiler (Remove and Replace)

Tesla Model X 2015-2024 Service Manual / Exterior Fittings / Active Spoiler (Remove and Replace)


  1. Remove the high mounted brake lamp (refer to procedure).
  2. Remove the fasteners (x4) that secure the active spoiler to the active spoiler stanchions (torque 6 Nm).

     Active Spoiler (Remove and Replace)

  3. Remove the active spoiler assembly from the top of the active spoiler stanchions.
  4. Close the liftgate.

Installation procedure is the reverse of removal, except for the following: Note: Clean the affected areas before installation.


     Motor - Active Spoiler (Remove and Replace)

    Removal Remove the LH and RH active spoiler torque rods (refer to procedure). Remove the bolts (x3) that secure the active spoiler motor to the liftgate (torque 6 Nm).

     Stanchion - Active Spoiler - LH (Remove and Replace)

    Removal Remove the active spoiler applique (refer to procedure). Remove the middle liftgate trim (refer to procedure). Remove the LH and RH side liftgate trims (refer to procedure).

     Applique - Active Spoiler (Remove and Replace)

    Warning: To avoid personal injury, wear cut-resistant gloves when performing this operation. Note: Use Dow Betaseal Express or an equivalent fast-curing adhesive to perform this procedur


     Hood Assembly (Remove and Install)

    Removal Remove the LH and RH underhood aprons (refer to procedure). Use tape to mark the position of the hood fasteners. Note: The following steps require an assistant. While supporting the weight of the hood, remove the nuts (x4) that secure the hoo

     Creating a Driver Profile

    When you first adjust the driver's seat, steering yoke position, or exterior side mirrors, the touchscreen prompts you to create a driver profile to save these adjustments. Your profile also saves various preferences you make while customizing Model X. See Using Tesla Profiles to learn more abou

    © 2019-2024 Copyright www.teslamx.net