Tesla Model X Owners & Service Manuals

Tesla Model X: Autopilot Features

NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with all features listed below, or a feature may not operate exactly as described.

These Autopilot convenience features are designed to reduce driver workload:

  • Traffic-Aware Cruise Control
  • Autosteer
  • Auto Lane Change
  • Autopark
  • Summon
  • Smart Summon
  • Stop Light and Stop Sign Warning
  • Navigate on Autopilot
  • Traffic Light and Stop Sign Control

You can enable/disable some of these features and in some cases, control how they work. To access settings associated with these features, touch Controls > Autopilot.

Drive to Calibrate Cameras

Model X must maneuver with precision when Autopilot features are being used. Therefore, before some features can be used for the first time or after some types of service repairs, cameras must complete a self-calibration process. For your convenience, the instrument panel displays a progress indicator.

When calibration is complete, Autopilot features are available for use. Calibration typically completes after driving 20-25 miles (32-40 km), but the distance varies depending on road and environmental conditions. For example, calibration completes quicker when driving on a straight road with multiple lanes (such as a controlled- access highway), with highly-visible lane markings (in the driving lane as well as the adjacent lanes). Contact Tesla only if your Model X has not completed the calibration process after driving 100 miles (160 km) in the described conditions.

If a camera has shifted from its calibrated position (for example, the camera or windshield was replaced), you must clear the calibration. To do so, touch Controls > Service > Camera Calibration > Clear Calibration. When the calibration is cleared, Model X repeats the calibration process. While this helps re-calibrate the cameras in many cases, Clear Calibration may not resolve all camera and sensor concerns.

NOTE: To calibrate, cameras require highly-visible lane markings in both the driving lane and adjacent lanes (at least two lanes over on each side of the vehicle). For best results, drive in the middle lane of a multi-lane highway (ideally with at least five lanes) that has clear lane markings and minimal traffic.

NOTE: If you attempt to use a feature that is not available until the calibration process is complete, the feature is disabled and the instrument panel displays a message.

NOTE: Model X must repeat the calibration process if the cameras are serviced by Tesla, and in some cases, after a software update.

    READ NEXT:

     Limitations

    Many factors can impact the performance of Autopilot components, causing them to be unable to function as intended. These include (but are not limited to): Poor visibility (due to heavy rain, snow

     Cleaning Cameras and Sensors

    To ensure the various Autopilot components can provide information that is as accurate as possible, keep them clean and free of obstructions, condensation, or damage (see Cleaning). Condensation c

     Traffic-Aware Cruise Control

    NOTE: Depending on market region, vehicle configuration, options purchased, and software version, your vehicle may not be equipped with Traffic-Aware Cruise Control, or the feature may not operate

    SEE MORE:

     Subframe Assembly - Rear (Remove and Replace)

    Removal Remove the rear drive unit: Small drive unit: Refer to procedure. Large drive unit: Refer to procedure. If the vehicle is equipped with air suspension, remove the bolt that secures the LH ride height sensor bracket to the subframe (torque 7

     Pinch Sensor (2nd row) - Rear - LH (Remove and Replace)

    Removal Remove the LH rear window regulator (refer to procedure). Disconnect the pinch sensor electrical connector. Release the tabs that secure the pinch sensor harness to the body.   Use a trim tool to release the push clips (x7) that secure

    © 2019-2024 Copyright www.teslamx.net