Tesla Model X Owners & Service Manuals

Tesla Model X: Do Not Transport with Wheels on the Ground

The front and rear motors in Model X generate power when the wheels spin. Always transport Model X with all four tires off the ground. Ensure that the tires are unable to spin at any time during transport.

WARNING: NEVER TRANSPORT YOUR VEHICLE WITH THE TIRES IN A POSITION WHERE THEY CAN SPIN. DOING SO CAN LEAD TO SIGNIFICANT DAMAGE AND OVERHEATING. IN RARE CASES EXTREME OVERHEATING MAY CAUSE THE SURROUNDING COMPONENTS TO IGNITE.

Instructions for Transporters

Do not transport Model X using any method that is not specified by Tesla. Adhere to the instructions provided in the following sections and observe all warnings and cautions provided. Damage caused by improper transporting of your vehicle is not covered by the warranty.

NOTE: Tesla is not liable or responsible for reimbursing services not dispatched through Tesla Roadside Assistance.

    READ NEXT:

     Approved Methods for Transporting

    A flatbed truck or comparable transport vehicle is the recommended method of transporting Model X. The vehicle can face either direction when using a flatbed. If Model X must be transported without

     Activate Transport Mode

    Transport Mode keeps the parking brake disengaged while winching Model X onto a flatbed truck. When active, Transport Mode displays a message indicating that the vehicle will remain free-rolling. T

     Pull onto the Flatbed Truck From Front (Without Tow Eye)

    CAUTION: To avoid damage, only pull the vehicle onto a flatbed truck using a properly-installed tow eye. Using the chassis, frame, or suspension components to pull the vehicle can result in damage

    SEE MORE:

     Limitations and Inaccuracies

    Collision Avoidance features cannot always detect all objects, vehicles, bikes, or pedestrians, and you may experience unnecessary, inaccurate, invalid, or missed warnings for many reasons, particularly if: The road has sharp curves. Visibility is poor (due to heavy rain, snow, fog, etc.). Br

     Assembly - Top Pad - Instrument Panel (Remove and Install)

    Removal Move the steering wheel to its lowest, most-extended position. Open both front doors. Open the glove box. Disconnect 12V power (refer to procedure). Remove the LH and RH instrument panel side covers (refer to procedure). On each side of the vehicle, relea

    © 2019-2024 Copyright www.teslamx.net