Tesla Model X: Sensor - Ambient Air Temperature (Remove and Replace)

Tesla Model X 2015-2024 Service Manual / Thermal Management / Sensor - Ambient Air Temperature (Remove and Replace)

Removal

Remove the front fascia assembly (refer to procedure).
Disconnect the electrical connector from the front of the ambient air temperature sensor.
Release the clip from the bracket to the right of the sensor.
Release the sensor by gently pulling it away from the front ducting.
Remove the ambient air temperature sensor from the vehicle.

Installation

Installation procedure is the reverse of removal.

SEE MORE:

Liftgate Drain - LH (Remove and Replace)

Removal Remove the active spoiler assembly (refer to procedure). Remove the active spoiler hinge (refer to procedure). Release the push clip that secures the drain funnel to the liftgate. Release the drain hose grommet from the liftgate.

Trim - Liftgate - Upper (Remove and Replace)

Remove Open the liftgate. Tip: Set the liftgate to a comfortable working height. Use a trim tool to release the clips (x9) that secure the upper liftgate trim. Remove the upper liftgate trim from the vehicle.