Tesla Model X Owners & Service Manuals

Tesla Model X: Thermal Management

READ NEXT:

 Filter - Cabin (Remove and Replace)

Remove Remove the glove box (refer to procedure). Remove the cabin filter cover.   Remove the cabin filter.  

 Housing - Filter - HEPA (Remove and Replace)

Note: Some vehicles are equipped with a HEPA filter element bonded to the filter housing. Remove Remove the underhood storage unit (refer to procedure). Gently release the filter ho

 Duct - HEPA Filter (Remove and Replace)

Removal Remove the HEPA filter housing (refer to procedure). Remove the push clips that secure the RH side of the cowl screen panel. Carefully lift up the RH side of the cowl screen p

SEE MORE:

 PIN to Drive

To increase security, you can prevent Model X from being driven until a 4-digit PIN (Personal Identification Number) is entered. To enable this setting, touch Controls > Safety > PIN to Drive and follow the on- screen prompts to create a driving PIN. When enabled, in addition to entering t

 Air bag - Front Passenger's (Remove and Replace)

Remove Remove the top pad from the vehicle (refer to procedure). Use a large flat-blade screwdriver to release the front-facing airbag mounting tabs from the top pad. Note: The front-facing mounting tabs are on the side of the airbag that faces the winds

© 2019-2024 Copyright www.teslamx.net