Tesla Model X: Sun Visors
The sun visors in Model X are held in place by magnets.
To protect occupants from sunlight coming through the
windshield, release the sun visor from the pillar and
pivot it toward the rear view mirror until the magnet
snaps into place. While held in place by the magnet, you
can adjust the sun visor and lower the extender to
provide maximum shade.

To expose the vanity mirror, lower the visor extender
then lower the mirror cover. While the cover is lowered,
the mirror is exposed and lights are illuminated.

To protect front seat occupants from sunlight coming
through the side window, lower the sun visor from the
pillar then lower the visor extender.
READ NEXT:
The seat, head support, seat belt and airbags work
together to maximize your safety. Using these correctly
ensures greater protection.
Position the seat so you can wear the seat belt correctly,
wh
SEE MORE:
Note: If available, calibrate
the forward facing camera using the Camera Calibration Target
(refer to procedure).
Note: This procedure describes
how to perform a drive cycle calibration on the forward facing camera.
It does not apply to the rear facing camera.
Connect a laptop wit
Warning: Only technicians who have been trained in High
Voltage Awareness are permitted to perform this procedure. Proper
personal protective equipment (PPE) and insulating HV gloves with a
minimum rating of class 00 (500V) must be worn any time a high
voltage cable is handled. Refer